Skip to content
Reliable reinforcement and construction solutions

10M Rebar: Size, Weight, Diameter & Uses

October 8, 2026
Photo 2023-06-05, 7 01 39 PM

10M Rebar: Size, Weight, Diameter & Uses in Canadian Construction

Reinforcing steel is one of the most important components inside a concrete structure. While concrete provides excellent compressive strength, reinforcing bars help concrete structures resist tension, cracking, and structural stresses.

Among the standard reinforcing bar sizes used in Canada, 10M rebar is a common choice for applications where relatively smaller-diameter reinforcement is required.

But what exactly is 10M rebar? How much does it weigh? What is its diameter? Where is it used, and how does it compare with larger sizes such as 15M, 20M, and 25M?

This guide explains the essential information you need to know about 10M rebar in Canada, including its dimensions, weight, applications, specifications, and the importance of professional installation.

What Is 10M Rebar?

10M rebar is a Canadian metric-designated reinforcing steel bar used to reinforce concrete structures.

The “10M” designation is part of Canada’s metric reinforcing bar system. It should not simply be interpreted as a bar with an exact 10 mm diameter.

A standard 10M reinforcing bar has a nominal diameter of approximately 11.3 mm, a nominal cross-sectional area of 100 mm², and a nominal mass of approximately 0.785 kg per metre.

10M rebar is useful in applications where the structural design calls for smaller reinforcement while still providing the tensile reinforcement needed within concrete.

10M Rebar Size, Diameter and Weight

Knowing the dimensions and weight of 10M rebar is important for material estimates, reinforcement schedules, transportation, fabrication, and project planning.

Property10M Rebar
Canadian designation10M
Nominal diameter11.3 mm
Nominal cross-sectional area100 mm²
Nominal mass0.785 kg/m
Approx. mass0.527 lb/ft
StandardCSA G30.18

Canadian reinforcing-bar reference tables list 10M rebar at approximately 11.3 mm nominal diameter, 100 mm² nominal area, and 0.785 kg/m nominal mass.

How Much Does 10M Rebar Weigh?

10M rebar weighs approximately 0.785 kg per metre.

For example:

  • 1 metre: approximately 0.785 kg
  • 5 metres: approximately 3.925 kg
  • 10 metres: approximately 7.85 kg
  • 12 metres: approximately 9.42 kg

Actual project quantities can vary depending on bar lengths, bends, laps, spacing, cutting requirements, and reinforcement details shown on the structural drawings.

What Is 10M Rebar Used For?

The application of 10M rebar depends on the structural engineer’s design, concrete dimensions, loading requirements, spacing, cover, and other project conditions.

Common applications can include:

1. Concrete Slabs

10M rebar may be specified as part of reinforcement systems for certain concrete slabs. Its smaller size can be suitable where the design requires relatively light reinforcement.

2. Residential Construction

10M reinforcement can be used in selected residential concrete applications, depending on the engineered design.

This can include reinforcement for slabs, footings, walls, and other concrete elements where 10M is specifically called for.

3. Foundations and Footings

Some foundation and footing designs can incorporate 10M bars as part of the overall reinforcement system.

The exact bar size and spacing should always follow the approved structural drawings.

4. Concrete Walls

10M bars may be used in concrete walls where the reinforcement design requires this size.

Proper placement, spacing, concrete cover, and tying are essential to ensure that the reinforcing steel is installed as designed.

5. Reinforcement and Distribution Steel

Depending on the project design, smaller reinforcing bars can be used for reinforcement and distribution purposes within concrete members.

The correct application should always be determined by the structural engineer rather than selected based only on bar size.

10M Rebar and Canadian Standards

Canadian reinforcing bars are commonly specified under CSA G30.18, which establishes requirements for carbon steel bars used for concrete reinforcement.

10M is one of the standard Canadian metric bar designations. The designation describes the reinforcing bar size, while the steel grade is a separate specification.

For example, Grade 400 reinforcing steel has a specified minimum yield strength of 400 MPa. Other grades may also be specified depending on the project.

Therefore, a project specification should be checked for both:

  • Rebar size
  • Rebar grade

It is important not to assume that every 10M bar has the same steel grade.

10M Rebar vs. Other Canadian Rebar Sizes

10M is one of several standard metric reinforcing bar sizes used in Canadian construction.

Rebar SizeNominal DiameterNominal AreaApprox. Weight
10M11.3 mm100 mm²0.785 kg/m
15M16.0 mm200 mm²1.570 kg/m
20M19.5 mm300 mm²2.355 kg/m
25M25.2 mm500 mm²3.925 kg/m
30M29.9 mm700 mm²5.495 kg/m

These values come from Canadian metric reinforcing-bar reference data.

Is Bigger Rebar Always Better?

No.

A larger reinforcing bar is not automatically the correct choice for a project.

Structural reinforcement is designed based on factors such as:

  • Required reinforcement area
  • Bar spacing
  • Concrete dimensions
  • Structural loads
  • Concrete cover
  • Development length
  • Lap requirements
  • Constructability
  • Structural detailing
  • Applicable building codes and standards

For this reason, contractors should install the size and grade specified by the approved structural drawings.

10M Rebar for Residential Construction

Residential concrete construction can involve many different reinforcement requirements.

Depending on the structural design, 10M rebar may be specified for applications such as:

  • Residential slabs
  • Footings
  • Foundation walls
  • Concrete pads
  • Retaining structures
  • Other reinforced concrete elements

The correct reinforcement arrangement depends on the engineering requirements of each project.

For contractors and developers, accurate material planning is particularly important because rebar must be delivered, placed, tied, inspected, and coordinated with concrete placement.

Why Proper 10M Rebar Installation Matters

Correct rebar installation is about more than simply placing steel inside concrete.

The reinforcing steel needs to be installed according to the approved reinforcement drawings and project specifications.

Important installation considerations can include:

Correct Bar Placement

Bars need to be positioned according to the reinforcement drawings.

Proper Spacing

Specified spacing needs to be maintained to provide the designed reinforcement distribution.

Concrete Cover

The reinforcement needs to maintain the required concrete cover for the application.

Proper Tying and Support

Rebar needs to remain in the correct position during construction and concrete placement.

Coordination With Other Trades

Reinforcement installation often needs to be coordinated with formwork, embeds, sleeves, mechanical systems, electrical work, and concrete placement.

A professional rebar contractor can help keep these activities organized and aligned with the construction schedule.

10M Rebar Supply and Installation in British Columbia

For contractors, builders, developers, and construction companies working in Surrey and throughout British Columbia, reliable rebar supply and installation can help keep projects moving.

21 Rebar Ltd. provides reinforcement services across British Columbia, with its website highlighting rebar installation, supply, fabrication, cutting, bending, and project support.

21 Rebar’s service area includes Surrey and communities throughout the Lower Mainland, including Delta, Richmond, New Westminster, Burnaby, Port Coquitlam, Langley, and Abbotsford.

The company’s stated project process includes:

  1. Project Review – reviewing scope, drawings, schedule, and site requirements.
  2. Planning – coordinating resources, safety procedures, and project milestones.
  3. Installation – placing reinforcement according to project requirements.
  4. Quality Check – reviewing work for quality, compliance, and readiness.

10M Rebar Fabrication

Not every reinforcement project requires straight bars.

Depending on the structural drawings, rebar may need to be:

  • Cut to specific lengths
  • Bent into required shapes
  • Bundled and labelled
  • Fabricated for project-specific requirements
  • Coordinated for delivery and installation

21 Rebar provides custom rebar fabrication services, including cutting, bending, welded rebar cages, project-specific bundling and labeling, and delivery coordination.

This can help contractors receive reinforcement that is prepared according to project requirements and ready for installation.

How to Calculate the Weight of 10M Rebar

The standard nominal mass of 10M rebar is approximately 0.785 kg per metre.

A simple calculation is:

Total rebar weight = Total length × 0.785 kg/m

For example, if a project requires 500 metres of 10M rebar:

500 × 0.785 = 392.5 kg

Therefore, 500 metres of 10M rebar has a nominal mass of approximately 392.5 kg.

This calculation is useful for preliminary material planning. Final quantities should be based on the project’s approved bar schedule and reinforcement drawings.

10M Rebar Frequently Asked Questions

What is 10M rebar?

10M rebar is a Canadian metric reinforcing steel bar designation used to reinforce concrete. It has a nominal diameter of approximately 11.3 mm and a nominal cross-sectional area of 100 mm².

What is the diameter of 10M rebar?

The nominal diameter of 10M rebar is approximately 11.3 mm.

How much does 10M rebar weigh per metre?

10M rebar has a nominal mass of approximately 0.785 kg per metre.

What is the cross-sectional area of 10M rebar?

The nominal cross-sectional area of 10M rebar is 100 mm².

Is 10M rebar 10 mm?

Not exactly. The Canadian 10M designation corresponds to a nominal diameter of approximately 11.3 mm. The “10M” designation should not be interpreted as an exact 10 mm diameter.

Can 10M rebar be used in foundations?

It can be used in foundation reinforcement where the structural design specifies 10M rebar. The required bar size, grade, spacing, and detailing should always come from the approved engineering drawings.

Is 10M rebar suitable for concrete slabs?

10M rebar can be specified for certain concrete slab applications, depending on the structural design and reinforcement requirements.

Where can I get rebar services in Surrey and BC?

21 Rebar provides rebar supply, fabrication, and installation services in Surrey and throughout British Columbia. The company works with contractors, builders, developers, and construction projects across the Lower Mainland.

Choose 21 Rebar for Your Next Project

The right reinforcement is an essential part of a strong concrete structure. From material supply and fabrication to accurate installation, every stage needs to be coordinated carefully.

21 Rebar Ltd. provides professional reinforcement services for residential, commercial, industrial, and civil construction projects throughout British Columbia.

Whether your project requires 10M rebar or another reinforcing bar size, the team can support your project requirements with rebar supply, fabrication, and installation services.

Service Area: Surrey & British Columbia

Phone: 604-618-9821
Email: 21rebarltd@gmail.com

Request a Rebar Quote

Planning a new construction project?

Contact 21 Rebar to discuss your reinforcement requirements, project drawings, schedule, fabrication needs, and installation scope.

21 Rebar Ltd. — Strength beneath every structure.